Watermaker WMS-1700

Part Number WMS-1700

This unit is set up in a modular, wall-mounted configuration. The WMS Series is also available in a variety of container or frame configurations.

Description

  • Sample application of where this watermaker may be used.

    316ss Direct-Drive High-Pressure Pump

  • 316ss High-Pressure Plumbing
  • PLC Micro³ Marine Control Unit
  • LED Salinity Monitor & Auto Diverter
  • High and Low Pressure Safety Shut-Offs
  • Fresh Water Rinse & Clean Feature
  • Prefiltration: 30 & 5 Micron
  • Precision Flow Meters and Pressure Gauges
  • Non-Corrosive Feed Pump
  • Product Water Sample Port
  • Multi-Tank Control
  • High-Efficiency TEFC Motors
  • Noise and Vibration Reducing Footings
  • All Necessary Installation Hardware
Component Length Depth Height Weight**
H.P. Pump/Motor 28.5 12.0″ 11.3″ 152.0 lbs
Prefilters
(including frame and piping)
18.5″ 8.3″ 13.3″ 16.0 lbs
Charcoal Rinse Filter
(including piping)
17.5″ 8.3″ 28.8″ 17.0 lbs
Electric Panel 9.3″ 6.0″ 12.5″ 9.0 lbs
Valve Panel 28.0″ 6.0″ 11.0″ 11.0 lbs
Membrane Assembly
(including piping)
53.5″ 3.8″ 16.3″ 57.0 lbs
Feed Pump
(including fittings)
16.4″ 8.8″ 11.1″ 25.0 lbs
Flow Panel 11.3″ 8.0″ 15.0″ 10.0 lbs
Contactor Box* 9.3″ 5.1″ 12.5″ 14.0 lbs
Install Kit, Hoses & Cleaning Pump/Tank* N/A N/A N/A 34.0 lbs
*not pictured
**approximate
Total Weight**: 345.0 lbs
Capacity* (GPD) 1746.0
(GPH) 72.8
(LPH) 275.4
Horsepower H.P. Pump 5.0
Feed Pump .75
H.P. Pump Flow 6.0
Power Specifications
Option 1 27.7 amps @ 230V, 60 Hz, 1-phase, 6.37 kW
Option 2 15.8 amps @ 230V, 60 Hz, 3-phase, 6.37 kW

*Standard Test Conditions:
Pressure: 900 PSI
Source Water: Salinity 35,000 ppm, pH 7, temp. 77F/25C
Product Flow: +/- 15% at standard conditions

Reviews

There are no reviews yet.

Be the first to review “Watermaker WMS-1700”